Ev 664 Microphone. ElectroVoice 664 Microphone — Guncotton Guitars Microphone is wired for high impedance unless 150 ohm is requested Pic # 2 is from a catalog I have showing the 664A mics basic specs and characteristics
Vintage Electrovoice EV 664 Microphone with XLR Cable Works Great from www.worthpoint.com
It was the most practical 664 in the series though it lacks the charm and mid century vibe that the 1st gen 664 had The mic was a cardioid dynamic, designed to maintain a consistent cardioid pickup pattern over a wide.
Vintage Electrovoice EV 664 Microphone with XLR Cable Works Great
While its distinct frequency characteristics can add depth to vocals or instruments, they may not suit every application The mic is in very good to excellent condition, with only some very light pitting on the brushed aluminum body, functions as it should The Electro—Voice Model 664 (or 664A or 664G) is specified
ElectroVoice 664 Cardioid Dynamic Microphone Reverb. Re: Electro Voice 664 microphone screw Post by Alan H » Mar Sat 29, 2025 9:16 pm A screw and a wing nut was used because it was an easy hardware store fix, as there is no parts diagram for a legacy product showing the original double sided screw/nut assy. The Electro-Voice 664 was designed as a public-address microphone in the 1950s
ElectroVoice 664 microphone, from the 1960s Stock Photo Alamy. While its distinct frequency characteristics can add depth to vocals or instruments, they may not suit every application The cardioid pattern is obtained through use of three sound entrances located in the back of the diaphragm.